In the door and window production process, door and window processing equipment, aluminum door and window processing equipment, broken bridge aluminum door and window equipment are used more and more frequently, many door and window manufacturing enterprises have not really operated before buying equipment, so here are some details of the installation and debugging of door and window processing equipment.

一，电力方面。电压380V是一般的门窗机械设备的正常的电压，电压一定要稳定，线路尽量不会影响设备使用和人员操作，地面线路要用护罩保护。

1、 Electricity. The voltage of 380V is the normal voltage of general door and window mechanical equipment. The voltage must be stable. The line will not affect the use of equipment and personnel operation as far as possible. The ground line should be protected by shield.

二，供气方面。由于门窗加工设备的压料要保证充足的供气量，这样就能更好的使用了，这是基础，来实现气缸压紧。正常情况下，门窗设备的供气量和气压都是有固定的参数要求的，即供气流量要达到0.3，气压也要能够达到8个压。在有多个门窗设备的情况下，这就需要多准备一些储气罐，这个根据现实情况而定。如果气压达不到，门窗加工设备的精度就会进出产生相应的一些影响，相应地加工效果也会发生一些偏离预想的现象。

2、 Gas supply. Due to the door and window processing equipment pressure to ensure adequate air supply, so that it can be better used, this is the foundation, to achieve cylinder compression. Under normal circumstances, the air supply volume and air pressure of door and window equipment have fixed parameter requirements, that is, the air supply flow should reach 0.3, and the air pressure should also reach 8 pressures. In the case of multiple windows and doors, it is necessary to prepare more air tanks, which depends on the actual situation. If the air pressure can not reach, the accuracy of the door and window processing equipment will have some corresponding impact, and the corresponding processing effect will also have some deviation from the expected phenomenon.

三，设备方面。断桥铝门窗设备种类很多，每一种设备又会有多种型号，或者多种设备部位不同等等。所以在门窗设备的安装调试方面，需要协调好各个区域的工作，把握好每一个细节。

3、 Equipment. There are many kinds of broken bridge aluminum door and window equipment, and each kind of equipment will have a variety of models, or a variety of equipment parts are different, etc. Therefore, in the installation and debugging of door and window equipment, we need to coordinate the work of each area and grasp every detail.

四，空间方面，在设备使用场地，要合理安排设备摆放位置，做到从原材料的存放和锯切加工到成品门窗出厂一条龙，不要出现东边下料还需要去西边搬运材料的问题。

4、 In terms of space, in the use site of equipment, it is necessary to reasonably arrange the location of the equipment, so as to achieve a one-stop process from the storage and sawing of raw materials to the delivery of finished doors and windows, so as to avoid the problem of Eastern cutting and Western material handling.

五，方面。要做到设备专人专用，并张贴设备的使用规范和出现事故的处理方法。

5、 Safety. It is necessary to assign special personnel to use the equipment, and post the safe use specifications of the equipment and the handling methods of safety accidents.

六，设备维护。设备的维护要专人进行，维护前一订要停电停气。每天使用完毕，清理设备和碎料，并检查设备有无异常。

6、 Equipment maintenance. The maintenance of the equipment should be carried out by special personnel, and the power and gas should be cut off before maintenance. After use every day, clean the equipment and debris, and check whether the equipment is abnormal.