• 18764172899
    0531一85977876

  • [field:companyname]
    全国咨询热线
当前位置:首页 - 新闻资讯 > 常见新闻 >

简述铝塑门窗设备的调整方式

来源:http://www.tianxincnc.cn/ 发布时间:2021-09-27
铝塑门窗设备防水性能和密封性能有很大的关系,那么铝塑门窗设备厂家在生产的时候要如何做到良好的水密性能的效果?铝塑门窗并不能够像塑钢窗一样采用无缝焊接工艺组角,现如今主要还是机械组装,如果处理不当的话,实际的工程当中会容易出现渗水现象。因此做铝塑门窗设计时,就一定要设计好排水系统,避免产生积水,出现渗水的可能。
There is a great relationship between the waterproof performance and sealing performance of aluminum-plastic door and window equipment. How should aluminum-plastic door and window equipment manufacturers achieve good watertight performance in production? Aluminum plastic doors and windows can not use seamless welding process to form corners like plastic steel windows. Now they are mainly mechanically assembled. If they are not handled properly, water seepage will easily occur in the actual project. Therefore, when designing aluminum-plastic doors and windows, we must design the drainage system to avoid ponding and water seepage.
铝塑门窗的防水系统设计原理很简单,即压力平衡原理。只要运用这一思维的原理,设计好一套的排水通路,就完全可以避免雨水渗漏发生。市场上越来越流行断桥铝塑门窗,因为其优点显而易见、深入人心,这时候铝塑门窗设备厂家对于产品质量的把控越发重要,相关的调整工作也是掌握。
The design principle of waterproof system of aluminum plastic doors and windows is very simple, that is, the principle of pressure balance. As long as we use the principle of this thinking and design a set of drainage channels, we can completely avoid rainwater leakage. Broken bridge aluminum-plastic doors and windows are becoming more and more popular in the market, because their advantages are obvious and popular. At this time, the control of product quality by aluminum-plastic door and window equipment manufacturers is more and more important, and the relevant adjustment work is also mastered.
首先是电力的调整,电压380V是平常的门窗机械设备的正常的电压,频率是50Hz,前方与零线之间的连接就需求留意了,前方和零线一定要连接好,否则有可能会引起事端,这个通常来讲,大多数的门窗设备厂家是经过色彩的分辩,前方为黑色或者是许蓝色,零线为红色。假如前方接反了,只需要将两根给换过来就好了。
The first is the adjustment of power. The voltage of 380V is the normal voltage of ordinary door and window mechanical equipment, and the frequency is 50Hz. Pay attention to the connection between the front and the zero line. The front and the zero line must be connected well, otherwise it may cause trouble. Generally speaking, most door and window equipment manufacturers distinguish the color, and the front is black or blue, The zero line is red. If the front connection is reversed, just replace the two.
还有供气方面,由于门窗设备的压料是要确保足够供气量,这么就能非常好的使用了,来实现气缸压紧,正常的情况之下,门窗设备的供气量与气压都是有固定的参数请求的,即供气流量需要到达0.3,气压也需要可以到达8个压,在有多个门窗设备的情况之下,这就需要多准备些储气罐,这个要根据现实情况而定。
In addition, in terms of air supply, the pressing of door and window equipment is to ensure sufficient air supply, so it can be used very well to realize cylinder compression. Under normal circumstances, the air supply and air pressure of door and window equipment have fixed parameter requirements, that is, the air supply flow needs to reach 0.3, and the air pressure also needs to reach 8 pressures. In the case of multiple door and window equipment, This requires more air storage tanks, which depends on the actual situation.