• 18764172899
    0531一85977876

  • [field:companyname]
    全国咨询热线
当前位置:首页 - 新闻资讯 > 行业新闻 >

门窗设备调试需要从哪些方面出发?

来源:http://www.tianxincnc.cn/ 发布时间:2022-01-06
第一,电力方面。电压380V是一般的门窗机械设备的正常的电压,电压一定要稳定,线路尽量不会影响设备使用和人员操作,地面线路要用护罩保护。
First, power. The voltage of 380V is the normal voltage of general door and window mechanical equipment. The voltage must be stable. The line will not affect the use of equipment and personnel operation as far as possible. The ground line shall be protected with a shield.
第二,供气方面。由于门窗设备的压料要保证充足的供气量,这样就能更好的使用了,这是基础,来实现气缸压紧。正常情况下,门窗设备的供气量和气压都是有固定的参数要求的,即供气流量要达到0.3,气压也要能够达到8个压。在有多个门窗设备的情况下,这就需要多准备一些储气罐,这个根据现实情况而定。如果气压达不到,门窗加工设备的精确度就会进出产生相应的一些影响,相应地加工效果也会发生一些偏离预想的现象。
Second, gas supply. As the pressing of door and window equipment should ensure sufficient air supply, it can be used better. This is the basis to realize cylinder pressing. Under normal circumstances, the air supply volume and air pressure of door and window equipment have fixed parameter requirements, that is, the air supply flow should reach 0.3 and the air pressure should also reach 8 pressures. In the case of multiple doors and windows, it is necessary to prepare more air tanks, which depends on the actual situation. If the air pressure is not reached, the accuracy of door and window processing equipment will have a corresponding impact, and the processing effect will deviate from the expected phenomenon.
断桥铝门窗加工设备
第三,设备方面。断桥铝门窗设备种类很多,每一种设备又会有多种型号,或者多种设备部位不同等等。所以在门窗设备的安装调试方面,需要协调好各个区域的工作,把握好每一个细节。
Third, equipment. There are many kinds of broken bridge aluminum door and window equipment, and each kind of equipment will have a variety of models, or a variety of equipment parts are different, etc. Therefore, in the installation and commissioning of door and window equipment, it is necessary to coordinate the work of each area and grasp every detail.
第四,空间方面,在设备使用场地,要合理安排设备摆放位置,做到从原材料的存放和锯切加工到成品门窗出厂一条龙,不要出现东边下料还需要去西边搬运材料的问题。
Fourth, in terms of space, in the equipment use site, it is necessary to reasonably arrange the equipment placement position, so as to achieve a one-stop process from the storage and sawing of raw materials to the delivery of finished doors and windows, and avoid the problem of blanking in the East and transporting materials in the West.
第五,安全方面。要做到设备专人专用,并张贴设备的安全使用规范和出现安全事故的处理方法。
Fifth, security. Special personnel shall be specially assigned to use the equipment, and the safe use specifications of the equipment and the treatment methods of safety accidents shall be posted.
第六,设备维护。设备的维护要专人进行,维护前一订要停电停气。每天使用完毕,清理设备和碎料,并检查设备有无异常。
Sixth, equipment maintenance. The maintenance of equipment shall be carried out by special personnel, and the power and gas shall be cut off before maintenance. After use every day, clean the equipment and debris, and check whether the equipment is abnormal.
以上就是断桥铝门窗加工设备给大家的精彩内容,更多的精彩内容请点击:http://www.tianxincnc.cn我们后续会有更多的精彩内容等您查看.
The above is the wonderful content of the broken bridge aluminum door and window processing equipment. For more wonderful content, please click: http://www.tianxincnc.cn We will have more wonderful content for you to check later