• 18764172899
    0531一85977876

  • [field:companyname]
    全国咨询热线
当前位置:首页 - 新闻资讯 > 行业新闻 >

铝合金门窗设备隐藏式排水很受欢迎!

来源:http://www.tianxincnc.cn/ 发布时间:2021-08-23
很多门窗在安装好以后可能会因为雨雪天气然后出现排水不及时,渗漏到屋内的情况,这无疑是大家都不愿意发生的,所以铝合金门窗的隐藏式排水就派上用场啦!
Many doors and windows may leak into the house due to rain and snow after installation, which is no doubt that everyone is unwilling to happen, so the hidden drainage of aluminum alloy doors and windows comes in handy!
型材与门、窗玻璃之间虽然存在密封胶条密封,但由于玻璃与型材表面的坚硬,在微观上密封胶条与玻璃与型材之间始终存在着毛细管,而室外雨水在交变的风压力作用下会通过这些毛细管进入腔体。这是一种难以避免的现象,除了在结构上尽量堵住这些水分之外,还必须设法把水排出,否则就会渗入室内。
Although there is a sealant strip seal between the profile and the door and window glass, due to the hardness of the surface of the glass and the profile, there are always capillaries between the sealant strip and the glass and the profile, and the outdoor rainwater will enter the cavity through these capillaries under the action of alternating wind pressure. This is an unavoidable phenomenon. In addition to blocking the water as much as possible in the structure, we must also try to drain the water, otherwise it will seep into the room.
门窗加工设备
常规的排水方法是在型材侧面开孔后再加一个塑料盖,缺点是内腔内的水份横向排出,动力不足,还容易被风吹倒,而且加盖不美观,容易老化脱落。
The conventional drainage method is to add a plastic cover after opening the hole on the side of the profile. The disadvantage is that the water in the inner cavity is discharged laterally, the power is insufficient, it is easy to be blown down by the wind, and the cover is not beautiful and easy to aging and fall off.
使用这种排水方式的好处:
Benefits of using this drainage method:
1.排水口垂直下降,排水力充足。
1. The drainage outlet drops vertically and the drainage force is sufficient.
排水口一改传统的水平排水口,改为垂直向下排水,水在重力作用下,排水量较大,排水口四周可同时排出,使总排量较大。
The traditional horizontal outlet is replaced by vertical downward drainage. Under the action of gravity, the water displacement is large, and the four sides of the outlet can be discharged at the same time, so that the total displacement is large.
2.防止风向倒灌。
2. Prevent reverse wind direction.
竖向下泄水孔,避免了风的横向吹来产生倒灌,水直接排出体外,阻力减小,排水更顺畅。
The vertical drainage hole avoids the backflow caused by the transverse wind, and the water is directly discharged out of the body, reducing the resistance and making the drainage more smooth.
3.不需要排孔,更美观。
3. There is no need to arrange holes, which is more beautiful.
外型看不出排水孔,这也就是所谓的“隐藏式”的原因,不用加排水罩,更加美观。
There is no drainage hole in the appearance, which is the reason for the so-called "hidden type". It is more beautiful without adding a drainage cover.
采用隐藏式排水设计,可以提高门窗的防水性能,防止漏水,使室内保持干爽。目前很多家庭装修也会选择这种类型的铝合金门窗设备,希望大家能够有所了解!
The hidden drainage design can improve the waterproof performance of doors and windows, prevent water leakage and keep the room dry. At present, many family decoration will also choose this type of aluminum alloy door and window equipment. I hope you can understand it!