• 18764172899
    0531一85977876

  • [field:companyname]
    全国咨询热线
当前位置:首页 - 新闻资讯 > 公司动态 >

铝门窗设备双头锯结构介绍

来源:http://www.tianxincnc.cn/ 发布时间:2022-03-09
1. 只须脚踩开关,即可自动压料,自动锯切,即安全又轻松。 2.气推油式进刀,切割速度稳定。 3.双头锯锯切的同时自动雾化喷油,以达到冷确及润滑锯片作用,使锯片不粘铝屑,锯片锋利耐用。 4.两个锯片独自马达驱动,高转速,切断力强劲。  5.采用上压料和侧压料两组压料装置,将材料压紧固定,压料压力可调整,防止材料压紧变形。 6.特附有进出料架安置在机台左右两端,出料架设有定位挡版,方便定尺寸锯切。 7. 双头锯同时锯切,一次可切割出两个可用45度角,高效且角度拼接准确无缝隙。
1. Just step on the switch, you can press the material automatically and cut it automatically, which is safe and easy. 2. Air push oil feed, stable cutting speed. 3. Automatic atomization and oil injection during double head sawing, so as to achieve the function of cooling and lubricating the saw blade, so that the saw blade is not stuck with aluminum chips, and the saw blade is sharp and durable. 4. The two saw blades are driven by motor alone, with high speed and strong cutting force. 5. Two groups of pressing devices, upper pressing and side pressing, are used to press and fix the material, and the pressing pressure can be adjusted to prevent the material from pressing and deformation. 6. The feeding and discharging racks are specially attached, which are arranged at the left and right ends of the machine. The discharging is erected with a positioning baffle plate, which is convenient for sizing sawing. 7. The double head saw cuts at the same time, which can cut two available 45 degree angles at one time, which is efficient and the angle splicing is accurate and seamless.
该机主要由锯头、床身、托料架、控制柜等部分组成。
The machine is mainly composed of saw head, bed, material support frame, control cabinet and so on.
4.2.1双头锯锯头
4.2.1 double head saw head
左锯头为固定锯头,右锯头为活动锯头,可在圆导轨上左右移动,各锯头由摆角机构、进给系统、工作台、工件夹紧系统、锯片、锯罩等组成。
The left saw head is a fixed saw head, and the right saw head is a movable saw head, which can move left and right on the circular guide rail. Each saw head is composed of swing angle mechanism, feed system, workbench, workpiece clamping system, saw blade, saw cover, etc.
断桥铝门窗加工设备
摆角机构由气缸驱动,由限位块定位。
The swing angle mechanism is driven by the cylinder and positioned by the limit block.
进给系统由气缸驱动,直线式进给。
The feeding system is driven by air cylinder and feeds in a straight line.
锯片由主轴电机驱动,进给系统为锯头的核心部件,使用中应重点保养和维护。
The saw blade is driven by the spindle motor, and the feed system is the core component of the saw head, which should be maintained during use.
工作台用于型材的支撑、定位及安装夹紧机构,锯罩起防护及集屑功能。
The worktable is used for the support, positioning and installation of clamping mechanism of profile, and the saw cover has the functions of protection and chip collection.
工件夹紧系统见气动原理图。
See pneumatic schematic diagram for workpiece clamping system.
4.2.2双头锯床身
4.2.2 double head sawing machine body
床身是由低碳钢板经折弯成型后焊接而成的,内部布置有加强筋板,焊接后,经人工时效处理,保证了床身有足够的刚性。 电控柜上安装有操作面板,操作控制元件装于操作面板上,切割工件时,操作人员须按操作程序按动按钮,以完成型材的切割加工。电控柜可在床身的一定范围内左右滑动。
The bed is made of low-carbon steel plate after bending and forming and welded. There are stiffeners inside. After welding, it is treated by artificial aging to ensure that the bed has sufficient rigidity. An operation panel is installed on the electric control cabinet, and the operation control elements are installed on the operation panel. When cutting the workpiece, the operator must press the button according to the operation procedure to complete the cutting of profile. The electric control cabinet can slide left and right within a certain range of the bed.