• 18764172899
    0531一85977876

  • [field:companyname]
    全国咨询热线
当前位置:首页 - 新闻资讯 > 公司动态 >

检修铝合金门窗设备要注意什么?

来源:http://www.tianxincnc.cn/ 发布时间:2022-02-10
铝合金门窗设备的轴承是设备的关键,及时的维修保养非常重要,维修保养时需要注意注油、及时检测,以免发生故障,应确保清洁,不能与化学物质接触。
The bearing of aluminum alloy door and window equipment is the key of the equipment, and timely maintenance is very important. During maintenance, attention should be paid to oil injection and timely detection to avoid failure. It should be clean and not in contact with chemicals.
平常要做好维修记录,不要等到设备出现问题才去维修,除此之外,在生产中,要及时发现设备隐患,及时排除隐患,对工人进行相应的培训,只有对设备有一定的认识,才能及时发现隐患,及时检修,保证生产。
The maintenance records should be kept well at ordinary times. Do not wait for the equipment to be repaired until there is a problem. In addition, in the production, the hidden dangers of the equipment should be found in time, the hidden dangers should be eliminated in time, and the workers should be trained accordingly. Only with a certain understanding of the equipment can the hidden dangers be found in time and repaired in time to ensure the production.
铝合金门窗设备能实现门窗的三道密封结构,使水汽腔得到合理分离,成功地实现了水气等压平衡,显著地提高了水气密度,达到窗净明亮的效果,铝制断桥窗帘设计,防蚊虫窗帘,在主框外设置有隔热材料,隔热材料的外表面与隔热砖的外表面平齐,主框梁连接的楼板或屋面面板上方分别设置有泡沫混凝土隔热层。
断桥铝门窗加工设备
Aluminum alloy door and window equipment can realize the three-way sealing structure of doors and windows, reasonably separate the water vapor chamber, successfully realize the equal pressure balance of water and gas, significantly improve the water and gas density, and achieve the effect of clean and bright windows. Aluminum bridge broken curtain design, mosquito proof curtain, thermal insulation material is set outside the main frame, and the outer surface of the thermal insulation material is flush with the outer surface of the thermal insulation brick, The foam concrete insulation layer is respectively arranged above the floor or roof panel connected by the main frame beam.
外表面的铝合金门窗为断桥铝、铝塑、铝木或铝塑铝门窗,在门窗之间设有隔热复合条,隔热砖外表面进行二次抹面,施工方便,成本低,隔热效果好。
Aluminum and plastic insulation strips are provided on the surface of aluminum doors and windows, which is convenient for the construction of aluminum and plastic insulation, and the external surface of aluminum doors and windows is provided with aluminum alloy and plaster.
但是,我们要记住一点,在用断桥铝切割锯切割塑钢型材的时候,要注意锯片的更换。如果我们继续用锯片切割,结果只能大大降低断桥铝切割门窗的设备寿命。因为断桥铝门窗设备在切割塑钢门窗型材时,锯片会发热,塑钢型材会粘附在锯齿上,切割效果会大大降低。
However, we should remember that when cutting plastic steel profiles with bridge breaking aluminum cutting saw, we should pay attention to the replacement of saw blade. If we continue to cut with the saw blade, the result can only greatly reduce the service life of the equipment for cutting bridge aluminum doors and windows. Because when the bridge broken aluminum door and window equipment cuts the plastic steel door and window profile, the saw blade will heat, and the plastic steel profile will adhere to the sawtooth, and the cutting effect will be greatly reduced.