• 18764172899
    0531一85977876

  • [field:companyname]
    全国咨询热线
当前位置:首页 - 新闻资讯 > 公司动态 >

系统门窗中角码该如何选用及加工?

来源:http://www.tianxincnc.cn/ 发布时间:2021-09-08
作为系统门窗中很关键的一环,角码决定了系统门窗的性能与型材之间的连接的好坏。同样的,角码对门窗所用型材的约束程度决定了整个系统门窗各项性能指标。所以角码在整个门窗系统中所起着至关重要的作用。
As a key part of the system doors and windows, the corner code determines the performance of the system doors and windows and the connection between profiles. Similarly, the constraint degree of the corner code on the profiles used for doors and windows determines the performance indexes of the whole system. Therefore, corner code plays a vital role in the whole door and window system.
作为与系统门窗相搭配的五金件,角码的大小要符合每种型材,因此,角码的形状在不同的门窗系统之中是不相同的。因此门窗角码的好坏就需要相应的标准去判断。接下来将会讲述门窗角码的选用与加工的必要技巧,供大家学习。
As the hardware matched with the door and window system, the size of the corner code shall comply with each profile. Therefore, the shape of the corner code is different in different door and window systems. Therefore, the quality of door and window corner codes needs to be judged by corresponding standards. Next, we will talk about the necessary skills for the selection and processing of door and window corner codes for everyone to learn.
01角码型材镶嵌口布置要合理
The inlay opening of 01 corner profile shall be arranged reasonably
制作角码所用的铝型材要有合理的设计槽口。在合格的角码型材上,镶嵌口的角度是个标准的入刀角度,如果设计的角度不合适,不但会影响角码在整个门窗系统中的性能,也会影响组角的稳定性,严重的将会无法进行组角。
The aluminum profile used for making corner codes shall have reasonable design notches. On the qualified corner code profile, the angle of the inlay opening is a standard cutting angle. If the design angle is not appropriate, it will not only affect the performance of the corner code in the whole door and window system, but also affect the stability of corner assembly. In serious cases, corner assembly will not be carried out.
02角码厚度确保合适
02 corner code thickness to ensure proper
角码型材的厚度一定要设计到合适的厚度,如果角码过于薄,将会降低角码对门窗的固定性,从而影响门窗系统的稳定性。同时,角码型材的挤出厚度同所搭配的门窗型材型腔之间的配合间隙不应该大于0.2mm,否则,在加工的过程中将会影响组角机的稳定性,甚至无法进行组角。
The thickness of the corner bar profile must be designed to the appropriate thickness. If the corner bar is too thin, it will reduce the fixation of the corner bar to the doors and windows, thus affecting the stability of the door and window system. At the same time, the fit gap between the extrusion thickness of corner bar profile and the cavity of matched door and window profile should not be greater than 0.2mm, otherwise, the stability of corner assembly machine will be affected in the process of processing, and even corner assembly cannot be carried out.
03角码下料长度要合适
03 the blanking length of corner code shall be appropriate
角码的切割长度,和系统门窗所用的型材的主型腔之间的配合间隙不能超过0.2mm,这样一方面避免了门窗相邻构件的错位,另一方面充分发挥了组角胶的潜能。
The cutting length of the corner code and the matching gap between the main cavity of the profile used for the system doors and windows shall not exceed 0.2mm. On the one hand, the dislocation of adjacent components of doors and windows is avoided, and on the other hand, the potential of corner glue is brought into full play.
04角码切割面的垂直精度
04 vertical accuracy of corner code cutting surface
角码切割面的垂直度不能大于0.1mm,因为在同一件门窗系统中,主型材型腔与角码之间的配合间隙不能大于0.2mm,所以,如果角码切割垂直度大于0.1mm,该角码连接的两根型材就有可能会发生扭曲。
The perpendicularity of the corner code cutting surface shall not be greater than 0.1mm, because in the same door and window system, the fit gap between the main profile cavity and the corner code shall not be greater than 0.2mm. Therefore, if the corner code cutting perpendicularity is greater than 0.1mm, the two profiles connected by the corner code may be distorted.